Radioboss Alternative Mac



RadioBOSS is an automated broadcast software suitable for playing music in public places, developed by DJSoft from Russia. Its simple and friendly user interface design enables novices to get started quickly, and its powerful features can make sure that you are able to automate your music playing needs in any appropriate occasions. 12 best zarastudio alternatives for Windows, Mac, Linux, iPhone, Android and more. Zarastudio alternative list source: zarastudio.es.

To perform a live broadcast, you’ll need to use a streaming software that supports Icecast server. This guide shows you how to connect using RadioBOSS software, but it’s essentially the same with any software.

If using RadioBOSS 5.8.1 or newer, you can use the Configuration Wizard to configure streaming to RadioBOSS Cloud. Simply enter your username and password and everything will be configured for you!

RadioBOSS Cloud automatically transitions between Live and AutoDJ broadcast. You can broadcast in any format, RadioBOSS Cloud will convert it to your station format automatically. To ensure high quality, we recommend broadcasting at 192 kbps for MP3 and 128 kbps for AAC.

Setting up a connection

The connection settings are located in the Information section in RadioBOSS Cloud.

To set up a connection in RadioBOSS, please do the following:

Open RadioBOSS. In the menu click Settings->Options. Navigate to Broadcast on the left. Check the Broadcasting enabled checkbox at the top. Click the “+” button to add a new connection.

Click the “Configuration Wizard” button, select Icecast, click “Next“.

Enter the connection details from the Information tab: server address and port.

  • If you use a DJ account: enter DJ username and password in the corresponding fields.
  • If you do not use a DJ account, leave username field empty and use the password specified in the Information tab.

Click “Finish“.

The encoder window should now contain server connection details. Adjust the streaming format and quality, if needed.

Listener statistics

If you want to see listener numbers when you broadcast live, you’ll need to set up statistics relay.

Server type, port and password used below are located in the Information section in RadioBOSS Cloud.

Radioboss Alternative MacRadioboss alternative mac keyboard

In the encoder window, open the Statistics tab. Select “Specify the server to get the statistics from” from the options. Input the information as follows:

  • Server type – select Icecast.
  • Server address – enter your server address e.g. c2.radioboss.fm
  • Port – your server port e.g. 8000
  • Password – your streaming password prepended with the “admin:” word. For instance, if the password is Aaoyx5LA, enter admin:Aaoyx5LA (click “show” to make the password visible to make sure it’s entered correctly).
  • Mount point – enter /autodj (must always be this value, not the mount point name you have configured in the settings).

The settings should look like this:

Radioboss

Click “OK“. The encoder should connect to the server and you should see a message like “Connected to server! (output N)” in RadioBOSS log. If the connection is not successful, please ensure that the settings are correct. Please refer to this page for more information about error messages.

Artwork

Please see this guide to send artwork for live streams: Live streaming artwork

Additional encoders allow you to send a stream from RadioBOSS Cloud to other streaming servers or to add new mount points on the RadioBOSS Cloud server, e.g. to broadcast in a different format or at a different bitrate. When broadcasting to an external server, Icecast and Shoutcast servers are supported.

The feature can also be used to migrate from other streaming services to RadioBOSS Cloud: configure an encoder to broadcast to your old server, so the old stream links will still be working.

To use the feature, click “Settings” in the menu and navigate to the Streaming section.

Click the “Add” button to add a new encoder. A window will appear where the encoder can be configured.

To add a new mount point on the RadioBOSS Cloud server, choose the “Internal server” type and enter the mount point name. The tune-in links for the newly created mount point will be available in the “Information” section.

To stream to an external server, choose either Shoutcast, Shoutcast v2, or Icecast, then enter the server connection details: server address, port, etc. as given by the service provider.

The Display name sets the name to show the encoder in the list. The field can be left blank.

Sample rate, format, bitrate, channels set the broadcasting format. Metadata charset – in most cases should be left at Auto unless the server requires specific configuration.

Radioboss Alternative Machine

After a new encoder is added, it will be shown in the list. The status box indicates the encoder status. Green color – the encoder is connected. Yellow– the connection is in progress. Red– there’s an error, hover the mouse over the box to see the details. In case of an error, you should also examine the log (click “Log” in the menu).