Dragonrise Inc Generic Usb Joystick Driver Download



Usb joystick driver

Amiga1200/Amiga600 does not work with my DragonRise INC. Start button on the joystick brings up the amiga config screen and I can see my Dragon USB joystick under Input tab selected as port1. All other systems work with my joystick. Only amiga ones act up. What I tried so far; Changed port 1 to my second joystick. @Substring I must come back to this because I have with my 2 Dragonrise now the same issue in Retroarch. When I look into Settings - Input - Input User 2Binds - User 2 Device Index he show me same as for User 1: Dragonrise Generic USB Joystick (#0) and no #1, even as in emulation station and in retroarchcustom.cfg they are both defined.Anyway in Dos everything work fine, but just first. HARDWARE INFO: Raspi 4 model B, Latest build of Retropie for pi 4, MK Arcade1up cab, HDMI video, 2x Dragonrise USB controllers, Audio is 3.5mm Headphone jack to speaker amp) Greetings, fellow Pi users! I have been working on an Arcade1up conversion for the past few days and I've run into a bit of a snag.

@Substring I must come back to this because I have with my 2 Dragonrise now the same issue in Retroarch. When I look into Settings - Input - Input User 2Binds - User 2 Device Index he show me same as for User 1: Dragonrise Generic USB Joystick (#0) and no #1, even as in emulation station and in retroarchcustom.cfg they are both defined. May 26, 2018 Download the latest drivers for your Generic USB Controller Interface (AVS) to keep your Computer up-to-date. The generic DragonRise based N64 controllers that you get off of ebay appear to have an issue with how their axes work. Currently they register Joystick movements in jstest in a really odd manner.

  • I’ve been searching forums and help everywhere online and I can’t figure this out. I have two homemade joysticks using the Easyget USB encoders from amazon. They are detected as DragonRise Inc. Generic USB Joystick by RetroArch.

    I have them configured for Emulationstation, NES, SuperNes, MegaDrive, and MAME just fine. I’m having an issue with 32x and getting the 6 button setup to work for Mortal Kombat for instance. I’ve created retroarchconfigs in the 32x config location using the button info I have from from running jstest. I can’t get my top row “XYZ” to be recongnized. I have gone into retroarch and verified core options is set for 6 button.

    Haven’t tried PSX with this joystick yet to see if I have similar issues. Any help is much appreciated.

    Here is a copy of my config:

    #Settings made here will only override settings in the global retroarch.cfg if placed above the #include line

    input_remapping_directory = /opt/retropie/configs/sega32x/

    input_player1_joypad_index = 0
    input_player1_b_btn = 6
    input_player1_a_btn = 5
    input_player1_y_btn = 8
    input_player1_x_btn = 7
    input_player1_l_btn = 11
    input_player1_r_btn = 4
    input_player1_start_btn = 3
    input_player1_select_btn = 2
    input_player2_joypad_index = 1
    input_player2_b_btn = 6
    input_player2_a_btn = 3
    input_player2_y_btn = 7
    input_player2_x_btn = 4
    input_player2_l_btn = 5
    input_player2_r_btn = 2
    input_player2_start_btn = 8
    input_player2_select_btn = 9

    # Axis for RetroArch D-Pad.
    # Needs to be either ‘+’ or ‘-‘ in the first character signaling either positive or negative direction of the axis, then the axis number.
    input_player1_up_axis = -1
    input_player1_down_axis = +1
    input_player1_left_axis = -0
    input_player1_right_axis = +0
    input_player2_up_axis = -1
    input_player2_down_axis = +1
    input_player2_left_axis = -0
    input_player2_right_axis = +0

    #Hotkeys- Hotkeys enable you to press a combination of buttons to do such things as exit emulators, save states,
    # and load states, as well as any other functionality in an emulator. (In the example below 8 is the select key
    # and 9 is the start key so when I hold down select and press start it will exit the emulator.)
    input_enable_hotkey_btn = 2
    input_exit_emulator_btn = 3
    input_save_state_btn = 5
    input_load_state_btn = 4
    input_menu_toggle_btn = 0
    input_state_slot_increase_axis = +0
    input_state_slot_decrease_axis = -0

    #include “/opt/retropie/configs/all/retroarch.cfg”

    retropie site / forum has moved – this forum is being made read only – please see https://retropie.org.uk/

  • Posts

Usb Joystick Driver

  • The forum ‘Controller Configuration in RetroPie’ is closed to new topics and replies.